Our anaerobic adhesive is used to lock and fit bushes, bearings, sleeves, pin hubs, pulleys, gears and other cylindrical parts. Retaining adhesives increase the strength of press fit parts. Allow larger machining tolerances. Allow components to be sip fitted however giving 2-3 times more torque than press fitted unit with no assembly stresses. Retaining adhesives come in varying locking strengths, low medium and high strengths. Temperature range from -55°C to +175°C.
- Total Surface Contact.
- Eliminates Backlash, Corrosion & Fretting.
- Slip Fitting Allows Easy Assembly.
- Allows Worn or Scored Parts to be Reused without Machining.
| |
RETAINING |
Curing Time |
Locking Torque M/mm2 |
| Product Code |
Description |
Max Diameter of thread Max gap filing |
Handling - Mins |
Functional - Hrs |
Breakaway |
Prevailing |
Shear Strength |
Temp Range |
| 53-11 |
Medium Strenght retainer for the retaining of parts that require subsequent dismantling. Bearing, Shafts, Bushes, Cogs & Gears retained by 53-11 can be easily removed from shafts or housing by ordinary tools & methods |
M20 0.12mm |
10-20 |
1-3 |
12-15 |
16-22 |
8-12 |
-55 +150 |
| 83-21 |
High strentgh retainer - increases torsional strength and enables slip - fited parts to wishstand higher cyclic loadings. Fast curing - typical fixture time 5 mins. Higher temperature resistance +175 C. Use to retain/seal heavy duty parts such as Cylinder Linings, Splines, Structural Tubing and Drive Keys. Approved for Oxygen. |
M20 3/4" 0.15mm |
2-5 |
1-3 |
30-35 |
55-70 |
20-30 |
-55 +175 |
| 86-86 |
High strentgh, very high temperature retainer.
Increases torsional strength and gives higher cyclic loadings. Gives high mechanical stength at high temperature - up to 230 C. Higher gap fill capability gives a 0.30mm diameter gap fill with a higher push out force allowing manufacturing tolerance to be greater or product to be used on worn parts. |
2" 0.30mm |
20-40 |
3-6 |
25-30 |
40-70 |
15-25 |
-55 +230 |
HELPLINE Call 01353 665141 | 
